• 
• 

This interface will convert frequency data given from RS232 CAT or CI-V to BCD output. BCD output can be used to control Antenna Genius or any other BCD controlled device.

On the rear panel you will find:

1. DC connector – to connect external power supply, 15V DC/500mA
2. RS232 input connector – DB9 male, used to connect your transceivers CAT output
3. RS232 output connector – DB9 female, used to conect any other device which need RS232 CAT data, like USB interface, amplifier etc
4. CI-V input connector – 3.5mm stereo, used to connect your ICOM transceivers CI-V output
5. CI-V output connector – 3.5mm stereo, used to conect any other device which need CI-V data, like USB interface, amplifier etc
6. Icom voltage control band input – 2.5mm mono, used to connect your older ICOM transceivers band data output
7. BCD output connector – DB9 female, used to control periphels with BCD data, like Antena Genius, amplifiers etc

On the front panel you will find:

1. Four BDC LEDs, showing current BCD output status
2. USB connector – for communication with PC
3. CAT LED – status of CAT
4. BV LED – Showing status of BV Band data
5. ON LED – showing power supply status

Win Applicaton for settings

To set device for connected radio, use our Windows Application.

Check for instructions in Quick Start Guide.

Check the latest Firmware Update Guide.