TOPIC:

Please post here about features you would like to see on a new version of Antenna Genius.
We can discuss them and I'll keep updating this post so we can have them visible in one place.

Antenna Genius Feature Wishlist:

1. SSDR/Maestro Integration
2. iOS application
3. CI-V support
4. Separate OM button configuration for ports A and B

Hi Dragisa,
AG and OM received here on Friday, and currently setting them up. All good except, one feature missing for the OM.

I would like to map OM outputs dependant on the Antenna port being mapped to input A or B.

Hello GM7VSB,

So on the same port, you'd like to have different OM configuration for side A and B?

Yes, glad I explained that well enough.

I've made a configuration that works for this, but I need to choose manually between the Port A config and Port B config.
The 'antenna last used' makes this quite useable.

That's an interesting workaround...

Ok, I'll add this to the list then, I'm pretty sure it's doable technically.

Thanks for the suggestion!

Btw I'm curious to what setup you have for this need to arise?

Flex 6600
2x Remo Deluxe BPF (these are PTP switched) one on Antenna A output, one on Antenna B output from the Flex.
Antennas are Tribander/40 with Quadriplexer and an 80/40m Quad Loop

would like to be able to control my 6700 and AG with the Maestro without using a computer

ah0u wrote: would like to be able to control my 6700 and AG with the Maestro without using a computer

That is up to FlexRadio software team, we all should push them a little bit more

Introducing RAG
RX Ant. Genius 8X2 (RAG)

Port A/B on switch hook to RX A/B on flex radio.
8 RX only antennas (or feeds from PS3000's) connected to the RAG.
Direct connects to Flex just like the AG 8X2
Interlock disabled by default allowing Diversity RX
Available with F or BNC Connectors.
Compatible with OM Module to control 4 Square, 8 Circle arrays etc.

If you can't hear them, you can't work them. Take your Receive to a new level with Total Control. Get your RAG today !

I would like to add my support for adding AG control to IOS software.
It would be extremely valuable for seamless remote control. Which I rely on a lot.

Hi

Any ideas??

I would like to be able to add more than one om-module to the configuration with my powergenius 8x2 antenna.
I would like to be able to control more than 16 relays, it would be great more than 32 relays .

I mean 5 stacks of 4 relays each one makes a total of 20 relays, plus the rx antennas give me another 16 more relays.

Qill be great that the om-module could be independent from another in order to have 2 active functions on the om-module software screen. TX and RX antennas separately.

Thanks in advance

Hi there,

I would like to have TX/RX Options on OM Relay Outputs.
In my case, I want to have 4 Outputs active on TX for a Stackmatch, but want to switch between Antennas on RX to have the max RX Gain.

Is this possible?

73
Ulli
DD2ML